Skip to the main content
  • Snelle levering
  • Scherpe prijzen
  • Gemaakt in Nederland
FT 3260

FT 3260 Flanged thermowell with Helical strikes

Datasheet Catalogus bekijken


DesignMachined and drilled from bar stock with machined spiral finish. Reduces vibration and gives a better temperature reading with smaller tip diameters.
Final design according to:
ASME PTC19.3 TW2016
ASME Report nov. 2011, vol. 133/041102
MaterialsSS316, SS310, SS321(H), SS347(H), Monel 400, Inconel 600, Hastelloy C276
Stepped20 mm, reduced point L=78mm x d=12 mm
StraightStandard diameter 22 mm, or to be specified
Bore6.6mm standard, other diameters possible
Bottom thickness5.0mm standard, other thicknesses possible
ConcialDiameter from 25 to 20 mm at the tip, or to be specified
Female conncection1/2" NPT, 3/4" NPT, 1/2" BSP, M20x1.5 or other threads possible
Flange FacingFlat Face, Raised Face, Ring Type Joint, Tongue Face, or Groove Face
Flange weldFull penetration, partial penetration or screwed flange seal welded
StandartsASME B16.5, DIN 2526/2527, or EN 1092-1
Insertion lengthTo specify
LaggingTo specify, standard 60mm
Flange sizeTo specify
Flange ratingTo specify
Flange facingTo specify
Protective coatings such as HALAR, PFA, Ruby Red
Radiographic test (X-ray)

Customisation possibilities

You can remark the customisation in your quote

Productcode FT 3260
Flange size
Flange rating
Flange facing